High-quality BLDC brushless motor (outrunner) for model aircraft. The BOOST motor range is the result of more than 15 years of experience in modern electric power systems.
Features
- Highest manufacturing quality
- Perfect ventilation thanks to the open case design
- Only the best materials used
- High-temperature-resistant neodymium magnets
- Extra-large quality ball bearings
Application – model / all-up weight
3D aerobatic models up to approx. 350g
Aerobatic models up to approx. 400g
Scale models and trainers up to approx. 500g
Gliders up to approx. 600g
Scope of delivery
- BOOST 10 Brushless Motor
- Aluminium mounting cross
- 1 propeller adapter each for front and rear bulkhead mounting
- Mounting screws
- Replacement motor shaft
- Instructions German/English
Technical data
Dimensions Ø = 28mm / L = 25mm
Weight = 49g
Shaft diameter = 3.2mm (3.175mm)
Recommended LiPo battery = 2 -3 cells
No-load speed per volt = 1400 rpm/V (KV)
Max. current = 10A (20s)
Brushless ESC (recommended) = PICHLER XQ+ 15, # 15919
Recommended propeller
PI-CON 7×5, # C5745 @ 2S LiPo (7.4V)
PI-CON 6×4, # C5744 @ 3S LiPo (11.1V)
Recommended LiPo battery
LEMONRC 1000-7.4
RED POWER 1100-11.1V
An overview of all BOOST brushless motors can be found here
Note: propellers other than those listed here (e.g. 3-blade or smaller sizes) can of course also be used. The same applies to batteries of a different, for example higher, capacity. Please make sure that the permissible currents (A) are not exceeded. For straightforward current measurement we recommend our proven POWER WATTS 150, # C7282 – an instrument you will need again and again and which should be part of every kit.
Information on our WEEE registration number: we are registered as a producer of electrical and/or electronic equipment with the stiftung elektro-altgeräte register (stiftung ear), Benno-Strauß-Straße 1, 90763 Fürth, Germany, under the following registration number (WEEE reg. no.): DE42729107
High-quality BLDC brushless motor (outrunner) for model aircraft. The BOOST motor range is the result of more than 15 years of experience in modern electric power systems.
Features
- Highest manufacturing quality
- Perfect ventilation thanks to the open case design
- Only the best materials used
- High-temperature-resistant neodymium magnets
- Extra-large quality ball bearings
Application – model / all-up weight
3D aerobatic models up to approx. 350g
Aerobatic models up to approx. 400g
Scale models and trainers up to approx. 500g
Gliders up to approx. 600g
Scope of delivery
- BOOST 10 Brushless Motor
- Aluminium mounting cross
- 1 propeller adapter each for front and rear bulkhead mounting
- Mounting screws
- Replacement motor shaft
- Instructions German/English
Technical data
Dimensions Ø = 28mm / L = 25mm
Weight = 49g
Shaft diameter = 3.2mm (3.175mm)
Recommended LiPo battery = 2 -3 cells
No-load speed per volt = 1400 rpm/V (KV)
Max. current = 10A (20s)
Brushless ESC (recommended) = PICHLER XQ+ 15, # 15919
Recommended propeller
PI-CON 7×5, # C5745 @ 2S LiPo (7.4V)
PI-CON 6×4, # C5744 @ 3S LiPo (11.1V)
Recommended LiPo battery
LEMONRC 1000-7.4
RED POWER 1100-11.1V
An overview of all BOOST brushless motors can be found here
Note: propellers other than those listed here (e.g. 3-blade or smaller sizes) can of course also be used. The same applies to batteries of a different, for example higher, capacity. Please make sure that the permissible currents (A) are not exceeded. For straightforward current measurement we recommend our proven POWER WATTS 150, # C7282 – an instrument you will need again and again and which should be part of every kit.
Information on our WEEE registration number: we are registered as a producer of electrical and/or electronic equipment with the stiftung elektro-altgeräte register (stiftung ear), Benno-Strauß-Straße 1, 90763 Fürth, Germany, under the following registration number (WEEE reg. no.): DE42729107
Rezensionen
Es gibt noch keine Rezensionen.