High-quality BLDC brushless motor (outrunner) for model aircraft. The BOOST motor range is the result of more than 15 years of experience in modern electric power systems.
Features
- Highest manufacturing quality
- Perfect ventilation thanks to the open case design
- Only the best materials used
- High-temperature-resistant neodymium magnets
- Extra-large quality ball bearings
Application – model / all-up weight
3D aerobatic models up to approx. 1800g
Aerobatic models up to approx. 2400g
Trainers up to approx. 2700g
Gliders up to approx. 3000g
Scope of delivery
BOOST 45 brushless motor
Aluminium mounting cross
Propeller adapter for front or rear bulkhead mounting
Mounting screws
Instructions German/English
An overview of all BOOST brushless motors can be found here
| Technical data | |
| Dimensions | Ø = 35mm / L = 54mm |
| Weight |
208g |
| Shaft diameter |
5.0mm |
| Number of poles |
14 |
| LiPo battery / number of cells | 3 -5 cells |
| No-load speed per volt/minute |
700 (KV) |
| Max. load 30 s |
50A |
| Recommended brushless ESC | PICHLER XQ-60, # C3092 |
| Recommended propeller | 13.5×7, # C4204 @ 4S LiPo (14.8V) 14×8, # C2594 @ 4S LiPo (14.8V) |
| Recommended LiPo battery | LEMONRC 3300-14.8V, # C9474 RED POWER 3500-14.8V, # 15429 |
Note: propellers other than those listed here (e.g. 3-blade or smaller sizes) can of course also be used. The same applies to batteries of a different, for example higher, capacity. Please make sure that the permissible currents (A) are not exceeded. For straightforward current measurement we recommend our proven POWER WATTS 150, # C7282 – an instrument you will need again and again and which should be part of every kit.
Information on our WEEE registration number
We are registered as a producer of electrical and/or electronic equipment with the stiftung elektro-altgeräte register (stiftung ear), Benno-Strauß-Straße 1, 90763 Fürth, Germany, under the following registration number (WEEE reg. no.): DE42729107
High-quality BLDC brushless motor (outrunner) for model aircraft. The BOOST motor range is the result of more than 15 years of experience in modern electric power systems.
Features
- Highest manufacturing quality
- Perfect ventilation thanks to the open case design
- Only the best materials used
- High-temperature-resistant neodymium magnets
- Extra-large quality ball bearings
Application – model / all-up weight
3D aerobatic models up to approx. 1800g
Aerobatic models up to approx. 2400g
Trainers up to approx. 2700g
Gliders up to approx. 3000g
Scope of delivery
BOOST 45 brushless motor
Aluminium mounting cross
Propeller adapter for front or rear bulkhead mounting
Mounting screws
Instructions German/English
An overview of all BOOST brushless motors can be found here
| Technical data | |
| Dimensions | Ø = 35mm / L = 54mm |
| Weight |
208g |
| Shaft diameter |
5.0mm |
| Number of poles |
14 |
| LiPo battery / number of cells | 3 -5 cells |
| No-load speed per volt/minute |
700 (KV) |
| Max. load 30 s |
50A |
| Recommended brushless ESC | PICHLER XQ-60, # C3092 |
| Recommended propeller | 13.5×7, # C4204 @ 4S LiPo (14.8V) 14×8, # C2594 @ 4S LiPo (14.8V) |
| Recommended LiPo battery | LEMONRC 3300-14.8V, # C9474 RED POWER 3500-14.8V, # 15429 |
Note: propellers other than those listed here (e.g. 3-blade or smaller sizes) can of course also be used. The same applies to batteries of a different, for example higher, capacity. Please make sure that the permissible currents (A) are not exceeded. For straightforward current measurement we recommend our proven POWER WATTS 150, # C7282 – an instrument you will need again and again and which should be part of every kit.
Information on our WEEE registration number
We are registered as a producer of electrical and/or electronic equipment with the stiftung elektro-altgeräte register (stiftung ear), Benno-Strauß-Straße 1, 90763 Fürth, Germany, under the following registration number (WEEE reg. no.): DE42729107
Rezensionen
Es gibt noch keine Rezensionen.