The PICHLER XQ brushless ESCs have been developed further and now offer a range of new functions:
- LiPo capable up to 8S
- 32-bit processor
- Adjustable BEC voltage
- Forward/reverse running possible (activated from your transmitter)
- Convenient programming via the new programming box or by Bluetooth / phone app
The ESCs are supplied ready to connect, fitted with 3 gold contacts (motor side) and an XT90 for the battery. Running characteristics are equally good with all common outrunner and inrunner motors, and operation is entirely untroubled even in the part-load range.
Adjustable settings
- Brake
- Timing
- Direction of rotation
- Forward/reverse running (SMR)
- Active freewheeling (SR)
- Battery type
- Low-voltage cut-off
- Start-up behaviour
- Cut-off behaviour
Features
- Ideal for model aircraft
- 32-bit microprocessor
- Extremely smooth, sensitive control response
- Selected, high-grade MOSFET transistors
- Powerful integrated BEC receiver power supply
- For all common brushless motors (outrunner or inrunner)
- Active freewheeling / rectifier for ducted fan units
- Top quality, proven a thousand times over
Technical data
Cells LiPo = 3 -8
Load (continuous) = 105A
Load (burst) = 115A
BEC = 8A (6V – 7.4V – 8.4V)
Weight = 130g incl. cables and connectors
Dimensions = 88 x 38 x 24mm
Connections = XT90 connector + 4.0mm gold contacts (sockets)
The programming box or the Bluetooth module is required to program the ESC (and can be used for all other XQ+ ESCs as well).
Recommended accessories
Programming box, # 15966
Bluetooth module ESC, # 15932
Information on our WEEE registration number – we are registered as a producer of electrical and/or electronic equipment with the stiftung elektro-altgeräte register (stiftung ear), Benno-Strauß-Straße 1, 90763 Fürth, Germany, under the following registration number (WEEE reg. no.): DE42729107
The PICHLER XQ brushless ESCs have been developed further and now offer a range of new functions:
- LiPo capable up to 8S
- 32-bit processor
- Adjustable BEC voltage
- Forward/reverse running possible (activated from your transmitter)
- Convenient programming via the new programming box or by Bluetooth / phone app
The ESCs are supplied ready to connect, fitted with 3 gold contacts (motor side) and an XT90 for the battery. Running characteristics are equally good with all common outrunner and inrunner motors, and operation is entirely untroubled even in the part-load range.
Adjustable settings
- Brake
- Timing
- Direction of rotation
- Forward/reverse running (SMR)
- Active freewheeling (SR)
- Battery type
- Low-voltage cut-off
- Start-up behaviour
- Cut-off behaviour
Features
- Ideal for model aircraft
- 32-bit microprocessor
- Extremely smooth, sensitive control response
- Selected, high-grade MOSFET transistors
- Powerful integrated BEC receiver power supply
- For all common brushless motors (outrunner or inrunner)
- Active freewheeling / rectifier for ducted fan units
- Top quality, proven a thousand times over
Technical data
Cells LiPo = 3 -8
Load (continuous) = 105A
Load (burst) = 115A
BEC = 8A (6V – 7.4V – 8.4V)
Weight = 130g incl. cables and connectors
Dimensions = 88 x 38 x 24mm
Connections = XT90 connector + 4.0mm gold contacts (sockets)
The programming box or the Bluetooth module is required to program the ESC (and can be used for all other XQ+ ESCs as well).
Recommended accessories
Programming box, # 15966
Bluetooth module ESC, # 15932
Information on our WEEE registration number – we are registered as a producer of electrical and/or electronic equipment with the stiftung elektro-altgeräte register (stiftung ear), Benno-Strauß-Straße 1, 90763 Fürth, Germany, under the following registration number (WEEE reg. no.): DE42729107
Rezensionen
Es gibt noch keine Rezensionen.