The PROGCON programming card is suitable for the D-POWER AVICON and D-POWER AQUACON controller series. The LCD programming card can be used to configure parameters and evaluate data log values. The corresponding controller is connected to the card with the normal servo connection. The card itself is connected to the receiver battery.
Features:
- Works as an individual device for setting parameters for the ESC
- Functions as a lipo battery voltmeter to measure the voltage of the entire battery pack and each cell
- the PROGCON programming board can display real-time data such as voltage, current, input choke, output choke, RPM, battery power, MOS temperature and motor temperature
- Detection of the PWM gas signal: Identification and display of input throttle pulse width and frequency
- ESC/servo tester: it works like a remote control to set the speed for ESC/servo by pressing the button on the program box
Technical data:
- Dimensions: 115x84x49 mm
- Weight: 40g
- Power: DC5 ~ 12.6V
The PROGCON programming card is suitable for the D-POWER AVICON and D-POWER AQUACON controller series. The LCD programming card can be used to configure parameters and evaluate data log values. The corresponding controller is connected to the card with the normal servo connection. The card itself is connected to the receiver battery.
Features:
- Works as an individual device for setting parameters for the ESC
- Functions as a lipo battery voltmeter to measure the voltage of the entire battery pack and each cell
- the PROGCON programming board can display real-time data such as voltage, current, input choke, output choke, RPM, battery power, MOS temperature and motor temperature
- Detection of the PWM gas signal: Identification and display of input throttle pulse width and frequency
- ESC/servo tester: it works like a remote control to set the speed for ESC/servo by pressing the button on the program box
Technical data:
- Dimensions: 115x84x49 mm
- Weight: 40g
- Power: DC5 ~ 12.6V
Rezensionen
Es gibt noch keine Rezensionen.