NEW! With forward/reverse function (switchable via transmitter)
Extron iQS brushless speed controllers impress with their high quality, performance and reliability. They fit perfectly with all commercially available brushless motors (external rotor or internal rotor) and are of course also the first choice for Extron brushless motors. Either LiPo, NiMH or NiCD batteries can be used. The number of cells is automatically recognized by the controller. Thanks to the use of modern, high-quality SMD components, the internal resistance of the controller is particularly low. The high clock frequency enables high-resolution and sensitive control behavior.
Highly flexible and temperature-resistant silicone cables underline the high quality.
Technical data:
- number of cells: 2 -6 LiPo / 5- 18 NiMH/NiCD
- Load (continuous): 100A
- Load (short time): 120A
- Integrated receiver power supply (BEC): 5V/6V / 8A
- Weight: 115g incl. all cables and plugs
- Dimensions: 90x37x12mm
Adjustable functions:
- Brake (off / soft / medium / hard)
- Direction of motor rotation (forward / reverse)
- Battery type (LiPo / NiMH / NiCD)
- Motor run switch-off mode (reduced power = 70%, OFF)
- switch-off voltage for LiPo (3.0V / 3.2V / 3.4V / 3.6V)
- Cut-off voltage for NiMH / NiCD (50% / 60%)
- Heli mode / Governor (RPM OFF / Mode 1 / Mode 2)
- Start behavior (standard / soft / very soft)
- Timing (AUTO / low 5° / medium 15° / high 25°)
- SMR function (ON/OFF)
- SR function (on/off)
- BEC adjustable (5V or 6V, standard)
Features:
- Fully assembled with yellow XT90 connector and 4.0mm gold plugs (no soldering required)
- 32 bit processor
- Extremely sensitive control behavior
- Selected, high-quality MOSFET Transistors
- Powerful, integrated BEC receiver power supply
- Easy to set up with optional programming box
- Completely pre-set at the factory
- Proven top Quality
- Maximum reliability
Optional accessories (recommended):
- IQs ProgramBox # X4087
NEW! With forward/reverse function (switchable via transmitter)
Extron iQS brushless speed controllers impress with their high quality, performance and reliability. They fit perfectly with all commercially available brushless motors (external rotor or internal rotor) and are of course also the first choice for Extron brushless motors. Either LiPo, NiMH or NiCD batteries can be used. The number of cells is automatically recognized by the controller. Thanks to the use of modern, high-quality SMD components, the internal resistance of the controller is particularly low. The high clock frequency enables high-resolution and sensitive control behavior.
Highly flexible and temperature-resistant silicone cables underline the high quality.
Technical data:
- number of cells: 2 -6 LiPo / 5- 18 NiMH/NiCD
- Load (continuous): 100A
- Load (short time): 120A
- Integrated receiver power supply (BEC): 5V/6V / 8A
- Weight: 115g incl. all cables and plugs
- Dimensions: 90x37x12mm
Adjustable functions:
- Brake (off / soft / medium / hard)
- Direction of motor rotation (forward / reverse)
- Battery type (LiPo / NiMH / NiCD)
- Motor run switch-off mode (reduced power = 70%, OFF)
- switch-off voltage for LiPo (3.0V / 3.2V / 3.4V / 3.6V)
- Cut-off voltage for NiMH / NiCD (50% / 60%)
- Heli mode / Governor (RPM OFF / Mode 1 / Mode 2)
- Start behavior (standard / soft / very soft)
- Timing (AUTO / low 5° / medium 15° / high 25°)
- SMR function (ON/OFF)
- SR function (on/off)
- BEC adjustable (5V or 6V, standard)
Features:
- Fully assembled with yellow XT90 connector and 4.0mm gold plugs (no soldering required)
- 32 bit processor
- Extremely sensitive control behavior
- Selected, high-quality MOSFET Transistors
- Powerful, integrated BEC receiver power supply
- Easy to set up with optional programming box
- Completely pre-set at the factory
- Proven top Quality
- Maximum reliability
Optional accessories (recommended):
- IQs ProgramBox # X4087
Rezensionen
Es gibt noch keine Rezensionen.