Teil-Q – Alienstand Plus black

The dimensions of the Alienstand model stand are approx. 92 x 48 x 6 cm (HxLxW) when folded.

The 4 movable holders are designed so that they are variable in height and inclination. At the top of the head area there is another rigid shelf, which is also suitable for temporarily storing the model at a comfortable working height, for example to replace the battery.

The AlienStand PLUS is foldable to take up as little space as possible during transport and is only 6 cm high. When folded, the model stand is held in position by two magnets.

To prevent damage to the models, the entire support surface is covered with a firm 3 mm thick self-adhesive foam rubber.

The adjustment of the shelves is done by a 4 mm angle wrench, which is included in the delivery. This is held in the head area hidden in a magnetic receptacle and is thus always there.

Due to its own weight, the alien stand is very stable. For additional stability in stronger winds, there are fastening options on the lower edge to anchor the model stand to the ground with tent pegs.

When the model stand is unfolded it looks like a small alien, hence its name.

The wooden parts are CNC milled from high quality and sturdy 15 mm birch multiplex. The positions for the hinges are already pre-milled.

• Dimensions folded approx. 92 x 48 x 6 cm (HxLxW)
• Space for five models (4 x variable and 1 x rigid)

Scope of delivery:

• CNC milled parts (unground)
• 22 x insert sleeves M6
• 8 x insert sleeves M4
• 8 x 4 kt nut
• 30 x M6 x 25 flange
• 2 x hinge
• 8 x M4 countersunk screw
• 1 x 4 mm angle wrench
• 2 x part-Q shield
• 2 x magnet 10 x 2
• 2 x magnet 6 x 3
• 2 x 2.8 m rubber

The dimensions of the Alienstand model stand are approx. 92 x 48 x 6 cm (HxLxW) when folded.

The 4 movable holders are designed so that they are variable in height and inclination. At the top of the head area there is another rigid shelf, which is also suitable for temporarily storing the model at a comfortable working height, for example to replace the battery.

The AlienStand PLUS is foldable to take up as little space as possible during transport and is only 6 cm high. When folded, the model stand is held in position by two magnets.

To prevent damage to the models, the entire support surface is covered with a firm 3 mm thick self-adhesive foam rubber.

The adjustment of the shelves is done by a 4 mm angle wrench, which is included in the delivery. This is held in the head area hidden in a magnetic receptacle and is thus always there.

Due to its own weight, the alien stand is very stable. For additional stability in stronger winds, there are fastening options on the lower edge to anchor the model stand to the ground with tent pegs.

When the model stand is unfolded it looks like a small alien, hence its name.

The wooden parts are CNC milled from high quality and sturdy 15 mm birch multiplex. The positions for the hinges are already pre-milled.

• Dimensions folded approx. 92 x 48 x 6 cm (HxLxW)
• Space for five models (4 x variable and 1 x rigid)

Scope of delivery:

• CNC milled parts (unground)
• 22 x insert sleeves M6
• 8 x insert sleeves M4
• 8 x 4 kt nut
• 30 x M6 x 25 flange
• 2 x hinge
• 8 x M4 countersunk screw
• 1 x 4 mm angle wrench
• 2 x part-Q shield
• 2 x magnet 10 x 2
• 2 x magnet 6 x 3
• 2 x 2.8 m rubber