High-quality BLDC brushless motor (outrunner) for model aircraft. The BOOST motor range is the result of more than 15 years of experience in modern electric power systems.
Features
- Highest manufacturing quality
- Perfect ventilation thanks to the open case design
- Only the best materials used
- High-temperature-resistant neodymium magnets
- Extra-large quality ball bearings
Application – model / all-up weight
3D aerobatic models up to approx. 700g
Aerobatic models up to approx. 800g
Scale models and trainers up to approx. 900g
Gliders up to approx. 1200g
Scope of delivery
BOOST 18 Brushless Motor
Propeller adapter for front and rear bulkhead mounting
Aluminium mounting cross, mounting hardware
Replacement motor shaft
Instructions German/English
An overview of all BOOST brushless motors can be found here
Technical data
Dimensions Ø = 28mm / L = 35mm
Weight = 75g
Bolt circle = 13mm
Shaft diameter = 3.2mm (3.175mm)
Recommended LiPo battery = 2 -3 cells
No-load speed per volt = 1050 rpm (KV)
Max. current = 22A (10s)
Brushless ESC (recommended) = PICHLER XQ-30, # C3056
Recommended propeller
PI-CON 8×6, # C5747
PI-CON 9×6, # C5748
PI-CON 10×5, # C5749
Recommended LiPo battery
LEMONRC 2200-7.4
LEMONRC 2200-11.1V
Note: propellers other than those listed here (e.g. 3-blade or smaller sizes) can of course also be used. The same applies to batteries of a different, for example higher, capacity. Please make sure that the permissible currents (A) are not exceeded. For straightforward current measurement we recommend our proven POWER WATTS 150, # C7282 – an instrument you will need again and again and which should be part of every kit.
Information on our WEEE registration number: we are registered as a producer of electrical and/or electronic equipment with the stiftung elektro-altgeräte register (stiftung ear), Benno-Strauß-Straße 1, 90763 Fürth, Germany, under the following registration number (WEEE reg. no.): DE42729107
High-quality BLDC brushless motor (outrunner) for model aircraft. The BOOST motor range is the result of more than 15 years of experience in modern electric power systems.
Features
- Highest manufacturing quality
- Perfect ventilation thanks to the open case design
- Only the best materials used
- High-temperature-resistant neodymium magnets
- Extra-large quality ball bearings
Application – model / all-up weight
3D aerobatic models up to approx. 700g
Aerobatic models up to approx. 800g
Scale models and trainers up to approx. 900g
Gliders up to approx. 1200g
Scope of delivery
BOOST 18 Brushless Motor
Propeller adapter for front and rear bulkhead mounting
Aluminium mounting cross, mounting hardware
Replacement motor shaft
Instructions German/English
An overview of all BOOST brushless motors can be found here
Technical data
Dimensions Ø = 28mm / L = 35mm
Weight = 75g
Bolt circle = 13mm
Shaft diameter = 3.2mm (3.175mm)
Recommended LiPo battery = 2 -3 cells
No-load speed per volt = 1050 rpm (KV)
Max. current = 22A (10s)
Brushless ESC (recommended) = PICHLER XQ-30, # C3056
Recommended propeller
PI-CON 8×6, # C5747
PI-CON 9×6, # C5748
PI-CON 10×5, # C5749
Recommended LiPo battery
LEMONRC 2200-7.4
LEMONRC 2200-11.1V
Note: propellers other than those listed here (e.g. 3-blade or smaller sizes) can of course also be used. The same applies to batteries of a different, for example higher, capacity. Please make sure that the permissible currents (A) are not exceeded. For straightforward current measurement we recommend our proven POWER WATTS 150, # C7282 – an instrument you will need again and again and which should be part of every kit.
Information on our WEEE registration number: we are registered as a producer of electrical and/or electronic equipment with the stiftung elektro-altgeräte register (stiftung ear), Benno-Strauß-Straße 1, 90763 Fürth, Germany, under the following registration number (WEEE reg. no.): DE42729107
Rezensionen
Es gibt noch keine Rezensionen.