High-quality BLDC brushless motor (outrunner) for model aircraft. The BOOST motor range is the result of more than 15 years of experience in modern electric power systems.
Features
- Highest manufacturing quality
- Perfect ventilation thanks to the open case design
- Only the best materials used
- High-temperature-resistant neodymium magnets
- Extra-large quality ball bearings
Application – model / all-up weight
Use with 3S (11.1V) LiPo = fast model aircraft such as the Funjet or similar
Operation with 2S (7.4V) LiPo = powered models and gliders
Scope of delivery
BOOST 18S Brushless Motor
Aluminium mounting cross
1 propeller adapter each for front and rear bulkhead mounting
Mounting screws
Replacement motor shaft
Instructions German/English
An overview of all BOOST brushless motors can be found here
Technical data
Dimensions Ø = 28mm / L = 35mm
Weight = 75g
Shaft diameter = 3.2mm (3.175mm)
Recommended LiPo battery = 2 -3 cells
No-load speed per volt = 2850 rpm (KV)
Max. current = 35A (10s) at good cooling
Brushless ESC (recommended) = PICHLER XQ-30, # C3056 / XQ-40, # C3091
Recommended propeller
at 3S LiPo =
PI-CON 5×5, # C5743
PI-CON 6×4, # C5744
at 2S LiPo =
PI-CON 8×6, # C5747
PI-CON 9×6, # C5748
Recommended LiPo battery
LEMONRC 2200-7.4, # C9467
LEMONRC 2200-11.1V, # C9468
Note: propellers other than those listed here (e.g. 3-blade or smaller sizes) can of course also be used. The same applies to batteries of a different, for example higher, capacity. Please make sure that the permissible currents (A) are not exceeded. For straightforward current measurement we recommend our proven POWER WATTS 150, # C7282 – an instrument you will need again and again and which should be part of every kit.
Information on our WEEE registration number
We are registered as a producer of electrical and/or electronic equipment with the stiftung elektro-altgeräte register (stiftung ear), Benno-Strauß-Straße 1, 90763 Fürth, Germany, under the following registration number (WEEE reg. no.): DE42729107
High-quality BLDC brushless motor (outrunner) for model aircraft. The BOOST motor range is the result of more than 15 years of experience in modern electric power systems.
Features
- Highest manufacturing quality
- Perfect ventilation thanks to the open case design
- Only the best materials used
- High-temperature-resistant neodymium magnets
- Extra-large quality ball bearings
Application – model / all-up weight
Use with 3S (11.1V) LiPo = fast model aircraft such as the Funjet or similar
Operation with 2S (7.4V) LiPo = powered models and gliders
Scope of delivery
BOOST 18S Brushless Motor
Aluminium mounting cross
1 propeller adapter each for front and rear bulkhead mounting
Mounting screws
Replacement motor shaft
Instructions German/English
An overview of all BOOST brushless motors can be found here
Technical data
Dimensions Ø = 28mm / L = 35mm
Weight = 75g
Shaft diameter = 3.2mm (3.175mm)
Recommended LiPo battery = 2 -3 cells
No-load speed per volt = 2850 rpm (KV)
Max. current = 35A (10s) at good cooling
Brushless ESC (recommended) = PICHLER XQ-30, # C3056 / XQ-40, # C3091
Recommended propeller
at 3S LiPo =
PI-CON 5×5, # C5743
PI-CON 6×4, # C5744
at 2S LiPo =
PI-CON 8×6, # C5747
PI-CON 9×6, # C5748
Recommended LiPo battery
LEMONRC 2200-7.4, # C9467
LEMONRC 2200-11.1V, # C9468
Note: propellers other than those listed here (e.g. 3-blade or smaller sizes) can of course also be used. The same applies to batteries of a different, for example higher, capacity. Please make sure that the permissible currents (A) are not exceeded. For straightforward current measurement we recommend our proven POWER WATTS 150, # C7282 – an instrument you will need again and again and which should be part of every kit.
Information on our WEEE registration number
We are registered as a producer of electrical and/or electronic equipment with the stiftung elektro-altgeräte register (stiftung ear), Benno-Strauß-Straße 1, 90763 Fürth, Germany, under the following registration number (WEEE reg. no.): DE42729107
Rezensionen
Es gibt noch keine Rezensionen.