High-quality BLDC brushless motor (outrunner) for model aircraft. The BOOST motor range is the result of more than 15 years of experience in modern electric power systems.
Features
- Highest manufacturing quality
- Perfect ventilation thanks to the open case design
- Only the best materials used
- High-temperature-resistant neodymium magnets
- Extra-large quality ball bearings
- Long 180mm shaft available as an optional accessory
Application – model / all-up weight
3D aerobatic models up to approx. 3000g
Aerobatic models up to approx. 3500g
Trainers up to approx. 4000g
Gliders up to approx. 4500g
Scope of delivery
- BOOST 60 brushless motor
- Aluminium mounting cross
- Propeller adapter for front or rear bulkhead mounting
- Mounting screws
- Instructions German/English
Accessories
Long motor shaft Boost 60 / Ø = 6mm / L=180mm, # 4954
An overview of all BOOST brushless motors can be found here
| Technical data | |
| Dimensions | Ø = 50mm / L = 51mm |
| Weight |
345g |
| Shaft diameter | 6.0mm / M3 internal thread |
| LiPo battery / number of cells | 3 – 6 cells |
| Number of poles | 14 |
| No-load speed per volt | 490 rpm (KV) |
| Max. current 60 sec. |
55A |
| Recommended brushless ESC | PICHLER XQ-70, # C3093 |
| Recommended propeller | PI-CON 16×8, # C5757 @ 3S LiPo (11.1V) PI-CON 15×8, # C5756 @ 4S LiPo (14.8V) PI-CON 14×7, # C5755 @ 5S LiPo (18.5V) APC 13×10, # X7281-1310 @ 6S LiPo (22.2V) |
| Recommended LiPo battery | LEMONRC or RED POWER |
Note: propellers other than those listed here (e.g. 3-blade or smaller sizes) can of course also be used. The same applies to batteries of a different, for example higher, capacity. Please make sure that the permissible currents (A) are not exceeded. For straightforward current measurement we recommend our proven POWER WATTS 150, # C7282 – an instrument you will need again and again and which should be part of every kit.
Information on our WEEE registration number
We are registered as a producer of electrical and/or electronic equipment with the stiftung elektro-altgeräte register (stiftung ear), Benno-Strauß-Straße 1, 90763 Fürth, Germany, under the following registration number (WEEE reg. no.): DE42729107
High-quality BLDC brushless motor (outrunner) for model aircraft. The BOOST motor range is the result of more than 15 years of experience in modern electric power systems.
Features
- Highest manufacturing quality
- Perfect ventilation thanks to the open case design
- Only the best materials used
- High-temperature-resistant neodymium magnets
- Extra-large quality ball bearings
- Long 180mm shaft available as an optional accessory
Application – model / all-up weight
3D aerobatic models up to approx. 3000g
Aerobatic models up to approx. 3500g
Trainers up to approx. 4000g
Gliders up to approx. 4500g
Scope of delivery
- BOOST 60 brushless motor
- Aluminium mounting cross
- Propeller adapter for front or rear bulkhead mounting
- Mounting screws
- Instructions German/English
Accessories
Long motor shaft Boost 60 / Ø = 6mm / L=180mm, # 4954
An overview of all BOOST brushless motors can be found here
| Technical data | |
| Dimensions | Ø = 50mm / L = 51mm |
| Weight |
345g |
| Shaft diameter | 6.0mm / M3 internal thread |
| LiPo battery / number of cells | 3 – 6 cells |
| Number of poles | 14 |
| No-load speed per volt | 490 rpm (KV) |
| Max. current 60 sec. |
55A |
| Recommended brushless ESC | PICHLER XQ-70, # C3093 |
| Recommended propeller | PI-CON 16×8, # C5757 @ 3S LiPo (11.1V) PI-CON 15×8, # C5756 @ 4S LiPo (14.8V) PI-CON 14×7, # C5755 @ 5S LiPo (18.5V) APC 13×10, # X7281-1310 @ 6S LiPo (22.2V) |
| Recommended LiPo battery | LEMONRC or RED POWER |
Note: propellers other than those listed here (e.g. 3-blade or smaller sizes) can of course also be used. The same applies to batteries of a different, for example higher, capacity. Please make sure that the permissible currents (A) are not exceeded. For straightforward current measurement we recommend our proven POWER WATTS 150, # C7282 – an instrument you will need again and again and which should be part of every kit.
Information on our WEEE registration number
We are registered as a producer of electrical and/or electronic equipment with the stiftung elektro-altgeräte register (stiftung ear), Benno-Strauß-Straße 1, 90763 Fürth, Germany, under the following registration number (WEEE reg. no.): DE42729107
Rezensionen
Es gibt noch keine Rezensionen.