NEW! With forward/reverse function (switchable from the transmitter)
PULSAR ESCs impress with high quality, performance and reliability. They are a perfect match for all common brushless motors (outrunner or inrunner). LiPo, NiMH or NiCd batteries can all be used. The number of cells is detected automatically by the ESC. Thanks to the use of modern, high-quality SMD components the internal resistance of the ESC is particularly low. The high switching frequency allows high-resolution, sensitive control behaviour.
Highly flexible, heat-resistant silicone leads underline the high quality.
Technical data
Number of cells = 2 -4 LiPo / 5- 12 NiMH/NiCd
Continuous current = 30A
Burst current = 40A
Integrated receiver power supply (BEC) = 5V/6V / 4A
Weight = 40g incl. all cables and connectors
Dimensions = 60x25x10mm
Adjustable functions
- Brake (off / soft / medium / hard)
- Motor direction (forward / reverse)
- Battery type (LiPo / NiMH / NiCd)
- Cut-off mode, motor running (reduced power = 70%, OFF)
- Cut-off voltage for LiPo (3.0V / 3.2V / 3.4V / 3.6V)
- Cut-off voltage for NiMH / NiCd (50% / 60%)
- Start-up behaviour (standard / soft)
- Timing (AUTO / low 5° / medium 15° / high 25°)
- SMR function (ON/OFF)
- SR function (on/off)
- BEC adjustable (5V or 6V, default setting = 5V)
Features
- Ready-fitted with a yellow XT60 connector and 3.5mm gold connectors (no soldering required)
- 32-bit processor
- Extremely smooth, sensitive control response
- Selected, high-grade MOSFET transistors
- Powerful integrated BEC receiver power supply
- Easy to set up with the optional programming box
- Fully pre-configured at the factory
- Proven top quality
- Maximum reliability
Recommended accessories
Program box # 15966
Information on our WEEE registration number: we are registered as a producer of electrical and/or electronic equipment with the stiftung elektro-altgeräte register (stiftung ear), Benno-Strauß-Straße 1, 90763 Fürth, Germany, under the following registration number (WEEE reg. no.): DE42729107
NEW! With forward/reverse function (switchable from the transmitter)
PULSAR ESCs impress with high quality, performance and reliability. They are a perfect match for all common brushless motors (outrunner or inrunner). LiPo, NiMH or NiCd batteries can all be used. The number of cells is detected automatically by the ESC. Thanks to the use of modern, high-quality SMD components the internal resistance of the ESC is particularly low. The high switching frequency allows high-resolution, sensitive control behaviour.
Highly flexible, heat-resistant silicone leads underline the high quality.
Technical data
Number of cells = 2 -4 LiPo / 5- 12 NiMH/NiCd
Continuous current = 30A
Burst current = 40A
Integrated receiver power supply (BEC) = 5V/6V / 4A
Weight = 40g incl. all cables and connectors
Dimensions = 60x25x10mm
Adjustable functions
- Brake (off / soft / medium / hard)
- Motor direction (forward / reverse)
- Battery type (LiPo / NiMH / NiCd)
- Cut-off mode, motor running (reduced power = 70%, OFF)
- Cut-off voltage for LiPo (3.0V / 3.2V / 3.4V / 3.6V)
- Cut-off voltage for NiMH / NiCd (50% / 60%)
- Start-up behaviour (standard / soft)
- Timing (AUTO / low 5° / medium 15° / high 25°)
- SMR function (ON/OFF)
- SR function (on/off)
- BEC adjustable (5V or 6V, default setting = 5V)
Features
- Ready-fitted with a yellow XT60 connector and 3.5mm gold connectors (no soldering required)
- 32-bit processor
- Extremely smooth, sensitive control response
- Selected, high-grade MOSFET transistors
- Powerful integrated BEC receiver power supply
- Easy to set up with the optional programming box
- Fully pre-configured at the factory
- Proven top quality
- Maximum reliability
Recommended accessories
Program box # 15966
Information on our WEEE registration number: we are registered as a producer of electrical and/or electronic equipment with the stiftung elektro-altgeräte register (stiftung ear), Benno-Strauß-Straße 1, 90763 Fürth, Germany, under the following registration number (WEEE reg. no.): DE42729107
Rezensionen
Es gibt noch keine Rezensionen.